Black-Xstar's Blog

Flashing instructions are as follows:
1. Make sure you device is SuperCID, you can check using the SPV Services client, if on reading the CID it displays 3131313131313131 in a long string of numbers then it IS CID unlocked, if not, the click the CID = 11111111 button and reset your device

2. Download the ROM linked in the first post

3. Download the attached TeraTermPro.zip

4. Disable USB connections in ActiveSync (right click the icon in the systray, then select connection settings and untick the USB connections box), turn off your device, hold camera ad plug the device into the USB port to enter bootloader mode.

5. Extract TeraTermPro.zip and run ttermpro.exe, then select Serial and then USB in the drop down box. Then type:
info 2

You will then probably get the following output:
info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
CMD55 failed
HTCSSuperCID        ' HTCE
Cmd>

6. Type
format BINFS

This will then output:
Cmd>format BINFS
Format BinFS partition.
Format is completed!!

Cmd>

7. Now type:
ResetDevice

You device will then reboot, display the splash screen for around 2 seconds before running into the bootloader again. This is normal.

8. Run the WM6TornadoALPHA.exe and be patient, it takes a while to extract the files before it can execute them.

9. Wait while it flashes your device

10. Done

下载：
http://www.jm012a9749.pwp.blueyonder.co.uk/WM6TornadoALPHA.exe